Firearm Forums - Arms Locker banner

1 - 12 of 12 Posts

·
Registered
Joined
·
1,331 Posts
Discussion Starter · #1 ·
it became very easy to make a very compact, lw can. Back in 1985, in CA, I made a 5 oz .45 can that really helped with the blast and the gun still cycled normally. The under-chamber can be made of (or ground down to). 030" aluminum. So can the outer "sleeve-tube". So can the inner tube, IF the welded-in, 1/4' thick washer (which fills the area between the two tubes as the front) is there to accept the slot for the internal snap-ring.

The .45 can had to have 3/8" ID wipes in it to be quiet and was 5" long, but the .45 bullet has so much momentum that no detectable amount of accuracy was lost. However, that sawed-off little 1911 (detonics length) with the can blocking the sights, wasn't exactly delivering the 4 MOA groups that can be had with a match .45, either. It most certainly did deliever 3" groups at 10m, tho. Paint the back of the can white, blacken the sights and shoot with one eye open. One eye aligns the sights, the other sees the target and the brain superimposes the two images. It works fine!

The can for the M21 Beretta is just 3.5" long, 1. 125" OD. The inside tube is just 3/4" OD. Only the first 2 baffles need to be copper tubing, and half of the baffles have a 3/8" iD hole in them. Those baffles are 3/4" long. The baffles with the 1/4" ID holes are just 3/8" thick. The wipes, which weren't really wipes, cause i burned the holes in them to full 1/4" ID, are made of inner tube rubber. They still serve the purpose of stopping the gases that are trying to work their way thru the compressed screenwire baffles.
 

·
Registered
Joined
·
9,718 Posts
How did that work for you after you ended up in jail?
 
  • Like
Reactions: Terry G

·
Registered
Joined
·
1,331 Posts
Discussion Starter · #4 ·
How did that work for you after you ended up in jail?
now, look, twit, anyone can see that the legal aspects of it have nothing to do with the performance of the can' and its design. So how about you stuff it where your head is. The more you post, the dumber you look and you looked retarded already 20 years ago. It's not my fault you live in that asshat country where everyone is as restricted as in any commie nation.
 

·
Registered
Joined
·
1 Posts
Great Experience!

Providing you with an opportunity to relive your childhood memories, the Capsule Corp Jacket by Fanzilla Jackets is the perfect depiction of our vision. With the same vibrant color and sharp cuts and edges, this jacket gives you that desired badass biker gang member appearance.
 

·
Registered
Joined
·
5,890 Posts
...The can for the M21 Beretta is just 3.5" long, 1.125" OD.
That's pretty good size-wise, but new manufacturing techniques allow for even smaller nowadays, with very good suppression and long life without having to rebuild. I'm not averse to old-school stuff, the last gun I ordered is a near 150 year old design; but when trying to maximize efficiency and performance, the newer designs simply tend to be more advanced. If we don't care about max performance, that's fine; but if we are, we need to include things that have the benefit of decades of additional progress and development.

I saw one small suppressor that was rated all the way up to .22-250 that was only 5.3" long and 1.1" in diameter. And this rimfire one is modular; only 1" diameter & can be set up either 3" or 2" in length.
https://www.youtube.com/watch?v=91Awhx4attw&feature=emb_logo
 

·
Registered
Joined
·
5,890 Posts
And this one's less than 2.5" long, and less than 1" in diameter and is still surprisingly quiet. It does use wipes that would have to be occasionally replaced if you want to maintain optimum suppression, but the baffles are permanent and can be disassembled for cleaning.
https://www.youtube.com/watch?v=-Bg994el6L0&feature=emb_logo
 

·
Registered
Joined
·
9,718 Posts
now, look, twit, anyone can see that the legal aspects of it have nothing to do with the performance of the can' and its design. So how about you stuff it where your head is. The more you post, the dumber you look and you looked retarded already 20 years ago. It's not my fault you live in that asshat country where everyone is as restricted as in any commie nation.
Welcome to the club, exactly who is your President elect and how much did it cost china to buy him?
 

·
Registered
Joined
·
2,068 Posts
Goonkid (Mel) will be peeing down his leg when he sees those units! His look prehistoric by comparison, in other words crude junk.
 

·
Registered
Joined
·
5,890 Posts
...It's not my fault you live in that asshat country where everyone is as restricted as in any commie nation.
I’m not an expert on canadian laws but at least they don’t have the pistol-brace jbt thug scares we do down here. As I understand it, sbr’s are no problem. I wouldn’t mind that ‘commie nation’ level of restriction.
 
  • Like
Reactions: Garand

·
Registered
Joined
·
1,544 Posts
As a felon, should Boati be disparaging any one else’s laws? He can’t legally have anything...
 
1 - 12 of 12 Posts
Top