Firearm Forums - Arms Locker banner

Replacement trigger group for 10/22?

1603 Views 4 Replies 4 Participants Last post by  Stillwater
I have two Ruger 10/22s and the trigger on both of them leaves a lot to be desired. The stainless one is abominable! Gritty and very heavy. Of course, it is the newer of the two guns. The blued one I have had for at least 20 years. And you know, now that I think of it, I have NEVER had it jam or misfire.

Rather than tinkering around with the present stock trigger set, what would be the best replacement trigger group I could get for these two rifles?

I guess while I am at it, is replacing the barrel with a good aftermarket one worth doing? I can't complain about how they shoot now, but they definitely aren't top on the list of my rifles for tight groupings.
1 - 2 of 5 Posts
Rich:
It is easy to upgrade your trigger group with Volquartson, On Target or Power custom parts, very inexpensively.

You can even order a whole trigger group from Volquartson.

If you want to go whole hog, and spend more than the rifle cost in the first place, get a kidd trigger group. Four of my 10/22's have Kidd trigger groups. They are available on the Internet for about $269.00, or there about.

Kidd trigger group -- http://www.coolguyguns.com/

Volquartsen -- http://www.volquartsen.com/index5.htm

On Target -- http://www.ontargetguns.com/

Power Custom -- http://www.powercustom.com/

Edited to add:

The gritty trigger on your new 10/22 is called a "Lawyer trigger." When you smooth up The triggers action, It releases the manufacture from all liability, as it now is a modified gun.

Bill
See less See more
Rich:
Here is something else you might want to look into. It's a good, picatinney rail sight for a Ruger 10/22.


http://www.tacticalprecision.com/ram.htm

Bill
1 - 2 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top