Firearm Forums - Arms Locker banner
1 - 3 of 3 Posts

· Banned
Joined
·
9,121 Posts
Discussion Starter · #2 ·
might be possible to internally-thread

one of the older versions of the Savage O/U, the kind where the barrels were soldered together. I seem to remember that they were thick enough for such. Need at LEAST a 1/2" OD barrel, tho, or the threaded joint will be much too weak for a shtf rifle. Rifle muzzles have a bad tendency to get knocked on things. So the 5/16" x40 TPI thread is a poor idea. That WILL suffice to mount a can on a 3/8" OD barrel. I've used such a method to mount cans on dozens of Jennings .22's.
 

· Banned
Joined
·
9,121 Posts
Discussion Starter · #4 ·
I did it because I was offered $500 each,

gun and can, stupid. So if I used a $200 gun,instead of a $50 gun, that was just throwing away $150, times the 40 Jenning's that I silenced. Now maybe a dumbass like you would do such a thing, but I wouldn't.. I made and mounted those 40 cans in 4 days.

ALL noisy shots are a BAD idea, for shtf, or even for normal hunting. They scare off the OTHER game, attract unwanted attention. With a can and subsonic loads, a MISS often doesn't scare off the animal or bird that you shot at, dummy. THAT'S why you want a can on ANY hunting arm, dummy.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top